IEP7000-X
High-performance multi-channel edge intelligent terminal
Category:
The IEP7000-X series high-performance multi-channel edge intelligent terminal is compatible with various industrial sensors, collecting different types of signals such as vibration displacement, velocity, acceleration, rotational speed, temperature, dynamic pressure, and process parameters of equipment operation. It processes signals and extracts features at the equipment edge, embedding intelligent diagnostic algorithms. The computed feature data and dynamic raw data are transmitted to the enterprise cloud platform or data center for equipment condition monitoring, intelligent early warning, intelligent diagnosis, and life prediction of large units such as vertical mills, rolling mills, roller presses, reciprocating compressors, diesel generators, and turbo compressors.
Contact:
Design characteristics
· Modular design, 8/16/24-channel IEPE temperature and vibration integrated or eddy current displacement sensors;
· 24Bit ADC, high-speed synchronous sampling, with a sampling rate up to 102.4K;
· Two Ethernet interfaces, one connected to the server, the other to PLC or DCS, eliminating the need for Profinet or EtherCAT gateway conversion;
· Two channels of high-fidelity audio noise sampling, 24bit high signal-to-noise ratio ADC to restore on-site noise;
· Supports eddy current displacement sensors, 4 channels of speed correlation, with order analysis function;
· EMC level 4, suitable for harsh field environments;
· Multiple communication modes including WIFI/4G/5G/Ethernet/Fiber/Zigbee;
· Supports access to variables such as stress and strain, oil and fluid quality;
· Powerful octa-core high-performance ARM processor, large-capacity FPGA programmable logic controller, ensuring real-time monitoring requirements.
Product Advantages
· High-performance industrial-grade dual-core MCU chip with powerful edge computing capabilities, meeting the requirements of real-time data acquisition and real-time communication.
· Equipped with fault recording function, automatically uploads original data information before and after faults.
· Features edge computing capabilities with built-in IEPlat intelligent device algorithm functions.
· Plug-and-play USB configuration interface connected to the host computer configuration tool for quick setup.
Product Parameters
Application Topology
Product Specifications
| Category |
Project |
Specifications |
| Acceleration Channel |
Number of Channels |
8 / 16 / 24 Channels |
| Input Type |
Non-isolated Input |
|
| Input Range |
±20 V |
|
| Input Impedance |
>200 kΩ |
|
| Dynamic Range |
110 dB |
|
| Signal-to-Noise Ratio |
90 dB |
|
| Supported Sensors |
IEPE Constant Current Source Accelerometer, Eddy Current Displacement Sensor, Temperature Sensor |
|
| Temperature Sensor Range |
–40 °C ~ 120 °C (Device Surface Temperature) |
|
| Fault Self-Diagnosis |
Automatic Detection of Accelerometer Short/Open Circuit |
|
| Measurement Interval |
1 s Index and 2 s Time-Domain Waveform |
|
| Output Mode |
Total Value, RMS, Spectrum, Time-Domain Waveform |
|
| Slow Variable Channel |
Measurement Channel |
4/8/12 Channels |
| Input Type |
Isolated Input, 1500 V Isolation |
|
| Signal Type |
4 ~ 20 mA (2 / 3 / 4-wire), ±20 V Voltage Signal |
|
| Digital Input Channels |
Measurement Channel |
2/4/8 |
| Input Type |
High-Speed Optocoupler Isolated Input, 1500 V Isolation |
|
| Signal Range |
High Level 3 ~ 24 V; Frequency 0.016 Hz ~ 20 kHz (1 rpm ~ 1,200 k rpm) |
|
| Supported Sensors |
PNP Proximity Switch (2 / 3-wire), Pulse Signal (TTL signal, max level 24V) |
|
| Sensor Power Supply |
12 V, Current Limited to 30 mA |
|
| Digital Output Channels |
Output Channels |
2/4/8 Channels |
| Output Type |
Optocoupler Isolated Output, 1500 V Isolation |
|
| Output Mode |
Relay Dry Contact Output |
|
| Torsional Vibration Input Channels |
Measurement Channel |
4 Channels |
| Sensor Types |
Proximity Switch, Eddy Current Displacement Sensor, Speed Sensor |
|
| Audio Channels |
Measurement Channel |
2 Channels |
| Sensor Types |
IEPE Noise Sensor |
|
| Input Range |
±20 V |
|
| RS485 Interface |
Number of Channels |
2 Channels |
| Interface Isolation |
2500 V Isolation |
|
| Protocol |
Modbus RTU |
|
| Ethernet |
Interface |
Dual Network Ports: eth0 Gigabit Port, eth1 100 Mbps Port |
| Communication Standard |
100Base-TX |
|
| Transmission Medium |
Category 5 Twisted Pair Cable |
|
| Wi-Fi Communication |
Interface |
SMA Female Connector |
| Radio Frequency Standard |
IEEE 802.11 a/b/g/n/ac |
|
| Frequency Range |
2.400 GHz ~ 2.4835 GHz |
|
| Output Power (Peak) |
12 dBm (Maximum) |
|
| 4G Communication |
Interface |
SMA Female Connector |
| Supported Bands |
LTE-FDD / LTE-TDD / WCDMA / TD-SCDMA / CDMA / GSM Full Network Support |
|
| Output Power (Peak) |
33 dBm (GSM Maximum Peak) |
|
| Mechanical Parameters |
Body Material |
Carbon Steel, Protection Level IP54 |
| Dimensions |
410mm*300mm*140 mm (excluding antenna and mounting parts) |
|
| Weight |
Approximately 10kg |
|
| Power Supply |
Voltage Type |
DC 8 ~ 36 V |
| Power |
<15 W |
|
| Storage |
Industrial-grade NAND |
1 G Bytes |
| Industrial-grade SD Card |
8 G Bytes |
|
| Environmental Parameters |
Operating Temperature |
–40 °C ~ 70 °C |
| Regulations/Certifications |
Electromagnetic Compatibility |
IEC 61326-1 |
| Wireless Spectrum |
ETSI EN 300 328 |
|
| CE Certification |
Complies with CE Requirements |
Series Model Guide
| IEP |
5 |
1 |
00 |
- |
5 |
| Basic Model |
Channel Type |
Communication Method |
Explosion-proof Certification |
- |
Sensor Types |
| IEP |
2=Single Channel |
1=WIFI |
01=Explosion-proof Type |
- |
1=Three-in-one Sensor + Speed |
|
|
3=Multiple Analog or Temperature Channels |
2=LoRa |
00=Basic Type |
|
2=4-Channel Three-phase Current |
|
|
4=4 Channels |
3=RJ45 |
|
|
3=16 Temperature Channels |
|
|
5=8 Piezoelectric Channels |
4=4G |
|
|
4=16 Channels 4-20mA Input |
|
|
6=16 Piezoelectric Channels |
5=RS485 |
|
|
5=Temperature and Vibration Integrated + Speed |
|
|
7=High Performance |
6=ZigBee |
|
|
7=Piezoelectric or Eddy Current + 4~20mA + Speed |
Series Model Information
| Product Model |
Product Parameter Description |
| IEP7100-5 |
Edge Computing, WiFi Communication, 8/16/24 Channels Temperature and Vibration Integrated or Eddy Current Displacement + 4/8/12 Channels 4~20 mA + 2 Channels Speed |
| IEP7300-5 |
Edge Computing, RJ45 Communication, 8/16/24 Channels Temperature and Vibration Integrated or Eddy Current Displacement + 4/8/12 Channels 4~20 mA + 2 Channels Speed |
| IEP7400-5 |
Edge Computing, 4G Communication, 8/16/24 Channels Temperature and Vibration Integrated or Eddy Current Displacement + 4/8/12 Channels 4~20 mA + 2 Channels Speed |
| IEP7500-5 |
Edge Computing, RS485 Communication, 8/16/24 Channels Temperature and Vibration Integrated or Eddy Current Displacement + 4/8/12 Channels 4~20 mA + 2 Channels Speed |
Material Download
Recommended products
SL1000AT-10-LF
SL1000AT-80
SL3000-X
SL4000-X
Leave a message
We will contact you as soon as we receive your information and give you a surprise.
Service Hotline
+86 27-6349 9950
Contact Information
Email: administrator@hbicc.com
Address: No. 6, Fozulingle Third Road, East Lake High-tech Development Zone, Wuhan, Hubei Province
