IEP4000-X
Four-channel edge intelligent terminal
Category:
The IEP4000-X series four-channel edge intelligent terminal is specially designed for collecting industrial equipment status information. It extracts equipment fault features through edge computing and transmits data and status analysis results via various methods such as WiFi, 4G, Ethernet, and RS485. It forms the core part of the monitoring system together with the three-in-one intelligent wired sensor.
Contact:
Design characteristics
· Supports access to 4 channels of three-in-one intelligent wired sensor signals
· Uses 24-bit high-precision ADC conversion chip, with a maximum sampling rate of up to 250ksps
· Supports WiFi, 4G, Ethernet, RS485 and other communication methods to meet various industrial site communication needs
· Supports AC220V or DC12V, built-in reverse polarity protection, short circuit protection, and overvoltage protection, compatible with WiFi and 4G multiple high-gain fiberglass antennas
Product Advantages
· High-performance industrial-grade dual-core MCU chip with powerful edge computing capabilities, meeting the requirements of real-time data acquisition and real-time communication.
· Equipped with fault recording function, automatically uploads original data information before and after faults.
· Features edge computing capabilities with built-in IEPlat intelligent device algorithm functions.
· Plug-and-play USB configuration interface connected to host computer configuration tool for rapid setup.
· Uses cast aluminum housing with IP65 protection rating, suitable for harsh industrial site conditions and electromagnetic environments.
Product Parameters
Application Topology
Product Specifications
| Parameters |
Performance Indicators |
| Analog Input Interface |
|
| Analog DC Voltage Input |
0V~5V |
| AD Conversion Accuracy |
24-bit |
| Maximum Sampling Frequency |
250ksps |
| Data Acquisition Length |
1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K |
| Communication Interface |
|
| Isolated RS485 |
1 Channel |
| 10M/100M Ethernet |
1 Channel |
| Wireless WiFi |
1 Channel |
| Frequency Band: 2.4GHz~2.4835GHz, Maximum Transmit Power 20dBm |
|
| Wireless 4G |
1 Channel |
| Frequency Bands: TD-LTE/ FDD-LTE/ WCDMA/ TD-SCDMA/ GSM, Transmit Power 33dBm |
|
| Communication Protocol |
Supports MQTT, TCP/IP and other protocols |
| Environmental Parameters |
|
| Operating Temperature |
-40 ºC to +85ºC |
| Storage Temperature |
-40 ºC to +125ºC |
| Relative Humidity |
95% (Non-condensing) |
| Power Supply Parameters |
|
| Operating Voltage |
AC (default): AC220V; DC (optional) DC 12V; |
| Power Consumption |
<15W |
| Appearance Parameters |
|
| Enclosure |
Die-cast aluminum enclosure, Protection Level IP65 |
| Dimensions |
304mm*184mm*78 mm (excluding antenna and mounting parts) |
| Weight |
Approximately 2kg |
| Other Interfaces |
|
| USB Interface (for configuring terminal parameters) |
Connects to host configuration tool for setup |
| Antenna Interface (N-type connector) |
Supports high-gain fiberglass antenna |
Wiring Definition Description
| Terminal Number |
Wiring Signal Name |
Remarks |
| CN1 Terminal |
||
| AC_L |
AC 220V Live Wire |
|
| AC_N |
AC 220V Neutral Wire |
|
| PE |
AC 220V Ground |
|
| P1 Terminal |
||
| 12V+ |
DC 12V Positive Pole |
|
| 12V- |
DC 12V Negative Pole |
|
| Main Control Board |
||
| J1 |
First Channel Temperature, Vibration, and Sound Three-in-One Sensor Input |
Network Port |
| J2 |
Second Channel Temperature, Vibration, and Sound Three-in-One Sensor Input |
Network Port |
| J3 |
Third Channel Temperature, Vibration, and Sound Three-in-One Sensor Input |
Network Port |
| J4 |
Fourth Channel Temperature, Vibration, and Sound Three-in-One Sensor Input |
Network Port |
| P4 |
Ethernet Interface |
Network Port |
| P5 Terminal |
||
| RS485_A |
RS485 A |
|
| RS485_B |
RS485 B |
|
| EGND |
RS485 GND |
|
| P2 Terminal |
||
| DGND |
First Channel Speed Sensor Power Negative Pole |
|
| RPM_IN1 |
First Channel Speed Signal Input |
|
| POWER+12V |
First Channel Speed Sensor Power Positive Pole |
|
| DGND |
Second Channel Speed Sensor Power Negative Pole |
|
| RPM_IN2 |
Second Channel Speed Signal Input |
|
| POWER+12V |
Second Channel Speed Sensor Power Positive Pole |
|
| USB Interface |
||
| DEBUG |
Serial Debugging Interface |
|
Series Model Guide
| IEP |
4 |
1 |
00 |
- |
5 |
| Basic Model |
Channel Type |
Communication Method |
Explosion-proof Certification |
- |
Sensor Type |
| IEP |
2 = Single Channel |
1 = WIFI |
01 = Explosion-proof Type |
- |
1 = Three-in-one Sensor + Speed |
|
|
3 = Multiple Analog or Temperature Channels |
2=LoRa |
00= Basic Model |
|
2= 4-channel three-phase current |
|
|
4=4 channels |
3=RJ45 |
|
|
3= 16-channel temperature |
|
|
5=8-channel piezoelectric |
4=4G |
|
|
4=16-channel 4-20mA input |
|
|
6=16-channel piezoelectric |
5=RS485 |
|
|
5= Temperature and vibration integrated + speed |
|
|
8= High performance |
6=ZigBee |
|
|
|
Series model information
| Product model |
Product parameter description |
| IEP4100-1 |
Edge computing, WiFi communication, capable of collecting data from various sensors. -1: 4-channel temperature, vibration, and sound three-in-one sensor |
| IEP4300-1 |
Edge computing, RJ45 communication, capable of collecting data from various sensors. -1: 4-channel temperature, vibration, and sound three-in-one sensor |
| IEP4400-1 |
Edge computing, 4G communication, capable of collecting data from various sensors. -1: 4-channel temperature, vibration, and sound three-in-one sensor |
| IEP4500-1 |
Edge computing, RS485 communication, capable of collecting data from various sensors. -1: 4-channel temperature, vibration, and sound three-in-one sensor |
Material Download
Recommended products
SL1000AT-10-LF
SL1000AT-80
SL3000-X
SL4000-X
Leave a message
We will contact you as soon as we receive your information and give you a surprise.
Service Hotline
+86 27-6349 9950
Contact Information
Email: administrator@hbicc.com
Address: No. 6, Fozulingle Third Road, East Lake High-tech Development Zone, Wuhan, Hubei Province